Quote:
Originally Posted by Kodename47
You should be able to log AVCS commanded, however at idle it should be 0 degrees.
Did the cams get timed correctly when it was put back together? That's the obvious issue and may need checking. If it's not that then I'd guess something is preventing oil flow to the solenoid to give it control. The fact the engine has been apart and is running poorly suggests it's going to be mechanical.
|
Thank you very much for your honest opinion. My mechanic has thought also it could be internal.
My mechanic took off the front cover and back checked the timing and said it is correct.
I will be speaking with my mechanic about looking into taking the engine back out and atleast check the internals and also make sure no oil ports are being blocked