Quote:
Originally Posted by Kris86
bump! need some help guys.
cant figure out what is causing this up to now. car wont idle on its own even.
it also sounds like a extreme unequal length header, meaning missing badly.
|
As Kodename47 said weird it not throwing and CEL codes and CEL light
AFAIK cams should all be at 0 at idle.
If just one is reading 20 then its possible that cam sensor is bad. but should throw code due correlation error.
If its now idling like crap mabe the cam actuator is stuck, but again you would expect cel codes/light.
mabe look through these TSB
11-130-13R : Difficulty Starting, Rough Idle, Cam Position, Misfire
http://www.ft86club.com/forums/attac...1&d=1375302652
02-132-12 : DTCs Relating to the AVCS (Active Valve Control System)
http://www.ft86club.com/forums/attac...0&d=1352490977