|
Enkei puts the offeset in the back side hub area of the wheel. It will be next to size, i.e. 17x9 +35 or 17.9 ET35 or 17x9 35. Those are just examples.
The previous wheels have stock specs thus the 20mm spacer worked, alot of people use 20/25mm spacers on stock wheels. So your new wheel adds 1" overall thus adding 1/2" (12mm) to both sides as compared to the previous wheels. So the fender side of the new wheels stick out about 12mm more then the previous wheels. If you want it to look the same you will need to minus the 12mm you gained from the 20mm spacer. So that will put you at a 8mm spacer. So you will need a 8mm spacer.
This is to small for a bolt-on so you will need this in a slip-on. With that 8mm is to much spacer for the stock lugs, so the lugs will be need to be swapped out for longer ones.
|