View Single Post
Old 03-20-2017, 11:48 PM   #62
Clipdat
Proud of BOXER
 
Clipdat's Avatar
 
Join Date: Dec 2012
Drives: Subaru Boxer
Location: Bay Area
Posts: 8,148
Thanks: 7,073
Thanked 6,846 Times in 3,675 Posts
Mentioned: 199 Post(s)
Tagged: 0 Thread(s)
Shifting at those speeds would lug the engine. 7mph is way too low to shift into 2nd, likewise 18mph to third. Not good to keep the RPMs that low and force the car to try to accelerate. Much better for the engine to rev out the gears a bit versus short shifting at low speeds/rpms.

Also I'm not sure if you're doing this, but when you're coming up to a stop sign or red light and downshifting, you don't want to actually downshift into first at all. Even with the clutch completely pressed in, you don't want to force the gear stick into first gear. Wait until you are at a complete stop before shifting it into first gear.

And yeah you don't need the bottom two holes on your back plate. The back of the license plate frame should have two little lips that hold the plate inside the frame.

Quote:
Originally Posted by mjanmohammad View Post
What I mean is, when you're driving relaxed in a neighborhood/city from 0-7mph, you're in first. 7-18mph is 2nd, 18-30 is 3rd, 30-40 is 4th, 40-50 is 5th, and 50-60 is 6th
__________________

Quote:
Originally Posted by humfrz
I'm old and lazy
Clipdat is offline   Reply With Quote