Quote:
Originally Posted by dj2020
The Pure Automotive Motec 130 solution seems the most complete so far. The 2JZ electronics are done and it looks like they're working on a LS application. For those that live in a OBD2 emission state, is there a way to pass emissions though? Please PM me if this is better answered privately.
|
You sent me a PM on this but I'd like to post about this here as it is something not taken into consideration in this post.
A standalone will NEVER pass plug in emissions checks. They might be able to fake the responses to the tester but that would land them in some very high water. With the current climate in the industry towards emissions this is going to be a bigger and bigger issue moving forward. Regardless of your political leanings (in the States at least) its happening.
Our kit does provide that if you plug a generic scan tool into the OBD2 port it will respond with emissions monitor results from the LS PCM. This is in no way us "defeating" the system or getting around it, but putting the proper responses on the bus so that most plug in emissions test will pass if the LS PCM deems them passing. If you really have an issue with emissions in your state, get an E-Rod kit and our module. If the inspector is lazy and doesn't notice there aren't any checks for evaporative emissions present, you are free!
Passing evaporative emissions with an LS PCM isn't the easiest thing, but its doable.