Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB - View Single Post

RatedT · 03-16-2017, 12:54 PM

Hi. All
I know this was probably talked about before but I'm wondering if anyone has any insight into a hub conversion for the front wheel hub to go from 5x100 to 5x114.3 PCD. I know I can convert using spacers but I want a deep offset and don't want to run spacers.

I know that Megan Racing used to have one but those had issues and are no longer in production. As far as I know now the only people making a hub conversion is T-Demand but theirs is $1400 and I'm not looking to spend that much.

I have heard that and '08 STI hub will work for the rears as the bolt position is the same and the axle input is the same, but I need a solution for the front.

Thanks.

03-16-2017, 12:54 PM	#1
RatedT Home Builder Join Date: Sep 2016 Drives: 2015 USDM FR-S Location: Windsor, ON Posts: 10 Thanks: 0 Thanked 0 Times in 0 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	5x114.3 Front Hub Conversion Hi. All I know this was probably talked about before but I'm wondering if anyone has any insight into a hub conversion for the front wheel hub to go from 5x100 to 5x114.3 PCD. I know I can convert using spacers but I want a deep offset and don't want to run spacers. I know that Megan Racing used to have one but those had issues and are no longer in production. As far as I know now the only people making a hub conversion is T-Demand but theirs is $1400 and I'm not looking to spend that much. I have heard that and '08 STI hub will work for the rears as the bolt position is the same and the axle input is the same, but I need a solution for the front. Thanks.