Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB - View Single Post

FujiwaraTofu86 · 03-10-2017, 10:18 PM

I had some rubbing issue in the front, so I added a 5mm spacer and I was able to get 8 full turn for the lug and torque them to spec.

How ever i am still very sketch with a 5mm spacer with oem stud.

my question is would 8 full turn be good enough, or should i swap them out for a 3mm spacer?

my worry is the 3mm might not give it enough room to clear

PS: wheel size is 17x8 48. im rubbing because I have neg camber up front, with oem struts

Thanks!

03-10-2017, 10:18 PM	#1
FujiwaraTofu86 Senior Member Join Date: Nov 2016 Drives: gt86 Location: GTA Toronto Posts: 103 Thanks: 174 Thanked 40 Times in 26 Posts Mentioned: 0 Post(s) Tagged: 0 Thread(s)	Advice on 5mm spacer or 3mm I had some rubbing issue in the front, so I added a 5mm spacer and I was able to get 8 full turn for the lug and torque them to spec. How ever i am still very sketch with a 5mm spacer with oem stud. my question is would 8 full turn be good enough, or should i swap them out for a 3mm spacer? my worry is the 3mm might not give it enough room to clear PS: wheel size is 17x8 48. im rubbing because I have neg camber up front, with oem struts Thanks!