Quote:
Originally Posted by MemphisR
You could try that. I just wanted to design something that looked and functioned like a factory part, and the STS brake light has individual lenses for each led. I was also concerned about light bleeding through. But by all means, give it a go your way and let us know. My method was a bit tedious, so if you your way works better, there are Cleary many people that would be interested. 🙋
-MemphisR
Sent from my E6883 using Tapatalk
|
I'm actually ok with what I have. I removed the "space ship" as it effectively obscured the view to a height of about 120mm due to reflection in the glass. I took out the lights module, covered it with black felt and pushed it in at the base of the window. It does not reflect in the glass and only obscures about 30mm by 195mm of the view. The back shelf is covered with black felt to cover where the spaceship was. The original wiring goes through a tiny hole in the felt.