|
You are going to be hitting frame and need pretty major Non-replaceable body work to fit such a large wheel at that offset in the front. Not sure why it needs to be 0 offset. It will stick too far out in the front, and not enough in the rear for rocket bunny fenders (unless running 12+ inch in the rear). Really an 11" is going to be wide enough to fit a 315 all around. Again Fitting that up front is a mess. 285s up front with a perfect flush RB v1 Fender fitment on 10.5" wheel was enough that I had to trim the kit, bumper, Rear frame extension, headlight bracket slightly, rubbing the seam at the top of the wheel well. Rubbing the rear RB Kit/bumper still as well.
|