Quote:
Originally Posted by balci
your post cleared it up for me, thanks a lot, didn't realize the width was divided between in and out on the wheel, thats where the bulk of the confusion came from
I'd prefer them to poke as much as possible, without hitting the fenders. and when I'm getting around to lowering it this summer, I won't go any lower than 0.4-0.7 inches
I got some real pokey 17x9 for winter wheels right now, but its my summer 18's I'd need these spacers for. gonna go take some rough measurements later today when I replace my brakes
thanks again man
|
You won't hit fenders, if anything you will rub the rear bumper tab.
What tire size are you running on the 18's?
What are the offsets of the 17x9's? My guess is +20. Do you want your 18's to look like that?
Pics of the two sets of wheels mounted?
Go look at pics of 18x8.5 +35(25mm spacer) or 18x8.5+40(20mm spacer) and see how they fit.
Most springs start at around 1inch drop for looks. RCE yellows are 20mm drop.
You're welcome. Post some pics.
