Quote:
Originally Posted by Ultramaroon
I am puzzled. The only metal to metal contact should be between the piston and the pushrod. Is the foot in that pushrod able to float off center? I'm checking that for myself. :/
Were you able to confirm the squeak when operated by hand?
 |
Yes on the squeaking when operating the clutch itself by hand. No when operating the clutch fork by hand, even with CSS installed. I believe that a liberal application of Triflow lubricated the sides of the "master cylinder piston sub-assembly" in the diagram above. I compressed the clutch fully before spraying it good, then released the clutch, then repeated the process. Noise still gone!