Quote:
Originally Posted by bslate3
I hate to revive an old thread but I'm having a really hard time fitting the Whiteline 20mm sway bar and endlinks with my RCE T2's. Are the endlinks that Whiteline supply's with the bar too long for KW coilovers as previously mentioned? I can install it but the sway bar literally sits in the lower control arm causing it to bind a lot, and that's with the endlinks shortened all the way.
I had a Perrin 19mm bar with stock endlinks on there before and had zero fitment issues. It looks like the Whiteline bar has different bends in it and is 1.25" more narrow in overall width than the Perrin bar.
Edited: ok figured it out. The supplied endlinks are too short. Ordered the correct shorter endlinks.
|
I'm having the exact same issue with my 22mm sway and my KW V3. did you say you had to order shorter endlinks? i have a lot of people on 86 track page on facebook saying they had to cut the rod down by 1-2 inches.