So my car wont build boost. I can accelerate and drive like normal, as long as I stay out of positive pressure.
First thing I checked for is any charge piping leaks. I found none.
Next thing I checked for is proper wastegate actuator movement with a mighty vac. Opened at 10psi as it should.
Next I took off my downpipe to check for any play in my wastegate flapper. There was a decent amount, so i thought this would be my issue. I tightened my actuator rod a turn and a half and it is solid again. Went out for a test drive and the car fell on its face again... The disappointment was huge.
So next I watched my spec/actual for fuel pressure, cam position and cam adjustment. Everything appeared to be right where the ECU was telling it to be.
I dont know what to do from here, and am looking for advice on what to chase next. I was thinking tomorrow I'll pull off my front pipe, see if the cat got clogged from shooting fireballs or something. Idk. I dont get it because the car drives fine when its not in boost.
Heres a log of the issue... Alittle driving and alittle trying to get into boost.
http://www.datazap.me/u/tylersango/n...og=0&data=1-13