Newest template cut from matte board...I cut it shorter than the last template because I plan on making the top panel a separate piece...I may cut the ledge down to 2.5" from 4".
Angled using a metal brake...
Looks like I'm going to go with Kydex 100 and ABS for the panels over aluminum. I had a piece of Kydex at work so I practiced a bend on it... it is only 3/32" thick but sturdy as hell. I will likely use Kydex for the bent sections and ABS for the flat panels. I will use a thicker ABS for the seat back panel.
__________________________________________
projekt zeal86 build
zeal.eightsix Facebook
Instagram @zeal.eightsix