Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB - View Single Post

bslate3 · 02-12-2017, 03:28 PM

I hate to revive an old thread but I'm having a really hard time fitting the Whiteline 20mm sway bar and endlinks with my RCE T2's. Are the endlinks that Whiteline supply's with the bar too long for KW coilovers as previously mentioned? I can install it but the sway bar literally sits in the lower control arm causing it to bind a lot, and that's with the endlinks shortened all the way.

I had a Perrin 19mm bar with stock endlinks on there before and had zero fitment issues. It looks like the Whiteline bar has different bends in it and is 1.25" more narrow in overall width than the Perrin bar.

Edited: ok figured it out. The supplied endlinks are too short. Ordered the correct shorter endlinks.

02-12-2017, 03:28 PM	#30
bslate3 Senior Member Join Date: Dec 2014 Drives: 2015 CWP BRZ Location: Crowley, TX Posts: 276 Thanks: 25 Thanked 58 Times in 45 Posts Mentioned: 2 Post(s) Tagged: 2 Thread(s)	I hate to revive an old thread but I'm having a really hard time fitting the Whiteline 20mm sway bar and endlinks with my RCE T2's. Are the endlinks that Whiteline supply's with the bar too long for KW coilovers as previously mentioned? I can install it but the sway bar literally sits in the lower control arm causing it to bind a lot, and that's with the endlinks shortened all the way. I had a Perrin 19mm bar with stock endlinks on there before and had zero fitment issues. It looks like the Whiteline bar has different bends in it and is 1.25" more narrow in overall width than the Perrin bar. Edited: ok figured it out. The supplied endlinks are too short. Ordered the correct shorter endlinks. Last edited by bslate3; 02-13-2017 at 09:13 AM.