Quote:
Originally Posted by DemonRawr
There is one other solution to quieting down your current setup; however, it will require messing with the midpipe section of your catback. You can go to a muffler shop and ask them to weld on another resonator before or after the resonator that's already on there. The resonator will have to be compact, and depending on the resonator, it will drastically reduce the noise.
That is what I did when my setup at the time was way too loud for my taste. I was skeptical at first when he said that with the addition of a small resonator, it would reduce the volume by 25%, but after the welding was done and I started the car, I was utterly shocked to find that it was even quieter than that!
It not only took the nasty bite out of the exhaust note, but reduced the volume to about half! The welder even said that he could have even made it quieter with a different resonator if I wanted.
I hope that this helps with your situation!
|
This sounds perfect. I'll give it a go and hope i get the same result. How much roughly is the cost of this?
Sent from my iPhone using Tapatalk