Quote:
Thanks! and Yes I will. I need the conversion from 5x100 to 5x114.3 anyway. 11mm Spacer in the front will actually push it out a couple mm too far, but is as small as you can get. Rear is getting a 25mm spacer and should be enough with such a wide tire. If not I will add another 10mm spacer and it should be good to go.
Eventually I will make the switch to 5x114.3 hubs/custom 5x100 wheels. For now this will work great. The new wheels weight about 22lbs (18x10.5) compared to my current XXRs that weight a little over 24lbs at 18x8.75.
|
Thanks for answer! 22 lbs are good. But spacers an conversion stuff weighs something, too.
I asked because I thought there would be any custom possibility to choose personal sizes for that rim.
Because actually I install Rocket Bunny V1 too an it took me a lot of time to chosse the right wheel and tire setup.
I decided to go with SSR too, but I don't wanted to mount spacers so I ordered SSR Professor SP1 in 9.5x18 -3 front and 10.5x18 -26 rear (5x100). So there is no need for conversion stuff or spacers. And the rims weigh 23.3 lbs front and 24.2 lbs rear. So that's quite good for a three-piece!