|
Hi All,
Two kits out of this first batch are now gone! Thanks to everyone that responded. If you did get a PM and still would like one please PM me back as i will not be going back and asking everyone again.
To those that opted to get the kit please watch Sojhinn's video below for a very detailed installation of the kit.
The only difference with this slightly revised one is that there 3 smaller cables that run into the cabin instead of one large cable. You will have one purple wire for a switch 12v(which plugs into the fuse area). One wire for the voltage display, this has to be grounded to a bolt in the footwell(there are many, ask if you cant find one). One wire for the throttle activation switch....thats it! If you choose not to connect the voltage display that is totally up to you, the unit will still turn on and function as it gets power from the switch 12v purple.
Any questions at all please bring them up here, we have tonnes of experienced users and you will usually get a response in less than a hour in most cases.
Very excited to see some new people installing the kit!
Dont forget, batterymart usually has a friday 5% off flash sale, look for it tomorrow.
Cheers,
[ame]https://m.youtube.com/watch?v=hm0ZZxxM0oU[/ame]
|