[Kingchett]

Originally Posted by GoobyFRS

Ok cool, so I would be fine on the 450cc injectors?
With that being said, I would put the 450cc injector flow scaling into the Injector Flow Scaling BRZ table.(by default reads 228.05)
Does that mean the BRZ table is PI and the regular Injector Scaling Table is DI?

The Oem size injectors(PI+DI) is good for around 300hp . Not sure on your setup but 450 should be GTG..


Port Injector Scaling


The PI injector size in cc/min. Change this value when larger Port Injectors have been fitted so the ECU can accurately calculate the PI open time required to deliver a requested volume of fuel. Also ensure that you change the Injector Opening Time Compensation map as per the injector manufacturer specifications.