Quote:
Originally Posted by Kodename47
Seems a little overkill IMO especially as you really don't want to be running bigger injectors than you need.
The honest answer is that you should need to put 700cc into the BRZ injector scaling parameter, however I would expect this to be a bit lower based on what I've read. The best way is to run largely PI and see what fuel trims you're getting and adjust as necessary.
|
Ok cool, so I would be fine on the 450cc injectors?
With that being said, I would put the
450cc injector flow scaling into the Injector Flow Scaling BRZ table.(by default reads 228.05)
Does that mean the BRZ table is PI and the regular Injector Scaling Table is DI?