Quote:
Originally Posted by macaulay7
Found the heated seat section in the manual and checked the wires. Powers and grounds all good. Even did a pin drag on the connectors which was also fine.
Decided to take apart the switches and ended up figuring out the issue. There was some debris that had decided to gum things up so I cleaned the internal contacts. The light source in these switches is a super tiny incandescent bulb and on closer inspection the filament looked broken. Sure enough after reinstalling the switches I now have heat again but no light in the switch when its in the on position. Not a big deal I can deal with that later.
Thanks for the help guys!
|
Well, that explains why the light in my driver side switch went out... after replacing my clutch, oddly enough.