Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB - View Single Post

Devil 86 · 02-03-2017, 10:43 AM

I'm having fitment issues with my Raceseng camber plates mounting on the KONI Yellows with lowering springs. Is anyone running a Raceseng plates with KONIs or Bilsteins with lowering springs? The top nut that mounts the top hat to the strut seems to be tightened all the way and there is still quite a bit of play with the spring. I tried burping the nut with an impact and even tried holding the piston with vice grips (with a rag of course) and the nut will not tighten anymore. I emailed Raceseng and they said they have no experience with working on KONIs which is weird since they sell a product that's supposed to work with KONIs. Is the spring supposed to sit loosely in the strut?

02-03-2017, 10:43 AM	#1
Devil 86 Member Join Date: May 2015 Drives: Ultramarine FR-S Location: Syracuse, NY Posts: 86 Thanks: 25 Thanked 15 Times in 12 Posts Mentioned: 2 Post(s) Tagged: 1 Thread(s)	Raceseng camber plates/KONI I'm having fitment issues with my Raceseng camber plates mounting on the KONI Yellows with lowering springs. Is anyone running a Raceseng plates with KONIs or Bilsteins with lowering springs? The top nut that mounts the top hat to the strut seems to be tightened all the way and there is still quite a bit of play with the spring. I tried burping the nut with an impact and even tried holding the piston with vice grips (with a rag of course) and the nut will not tighten anymore. I emailed Raceseng and they said they have no experience with working on KONIs which is weird since they sell a product that's supposed to work with KONIs. Is the spring supposed to sit loosely in the strut?