Quote:
Originally Posted by Roadcone
is there a list that describes what each of these pids means? RPM2 means pretty much nothing to me and doesn't seem to have a useful output.
change the pdf to txt. got around the upload file size filter with that. here's what i just got. some of these numbers make ZERO sense.
|
Unfortunatly opensource is not supported like paid systems like OFT Ecutek or BRZEDIT.
It done by guys working for free and some don't even own brz/86.
It a lot more work and hassle than paid systems unfortunately
MAF mas air flow grams/sec
MAF_V mas air flow sensor volts
CL_OL open loop closed loop fueling
LOAD engine load calculation
LTFT long term fuel trim
STFT short term fuel trim
AFR air fuel ratio measured by 02 sensor
AFR_Commanded is AFR ECU is targeting
Fueling_Status likely port direct or combined not sure
FLKC fine learning knock control
FBKC feedback knock control
KCA Knock correction advance
ECT engine coolant temp
IAT intake air temp
MAP manifold absolute pressure
when their is stuff like RPM and RPM2 is likely they were testing the ram addresses to see which ones worked.
Id remove the lines Conditionprn and Action they will cause problems
I cannot test these as im on A02G rom.
The ram addresses were dug out by the romraider guys a couple of years ago, their likely off doing other stuff now