Okay I shouldn't be posting here late at night, let alone mess with flashing and logging.
The load change log I posted above is totally messed up. The AVCS is not active at all. I don't understand why. I followed my usual procedure. After flash:
- Ignition on, wait 20 secs, then off again.
- Ignition on, wait 20 secs, start engine.
- Without touching anything let the car idle for 1 minute.
I even timed the one minute yesterday because it was late and I didn't want to let the car idle for too long unnecessarily (neighbors bedroom facing my driveway).
Anyway the log shows AVCS is not active at all:
http://datazap.me/u/tor/205?log=0&data=22-33-34-35-36
So I suppose 1 min wasn't enough for the calibration to complete?
If AVCS stayed at 0 during the drive, I suppose that would throw everything off including MAF?
P.s.
The load change is the only thing changed (OL fuelling back to normal).