Quote:
Originally Posted by B$
Well gee, I wish I could do that. Wiring and so forth is not my forte...
I thought there was a PLUG AND PLAY kit that did that out there...if anyone knows the name and can link me, I'd appreciate it!
Been looking for awhile for a "3rd/4th" brake light kit...besides Valenti n etc.
|
No such kit exists sadly.
Valentis pulse when you hit the brakes, but the V doesnt stay on as a running light at night without modification and no matter what you have to tap at least the brake wire on your tail lights.
EDIT: if you're afraid of screwing up the stock wiring, check my DIY to make your own harness:
http://www.ft86club.com/forums/showthread.php?t=114591
If you make that harness and splice the wires from the 4th brake light to it, it becomes "plug and play" when you actually install it on the car. IMO the hardest part is just getting the light in place and fishing the wiring around the rear bumper.
I was able to do my 4th brake light without a lift or removing the exhaust, but I have the dual canister style exhaust. Not the stock type with a big muffler in the middle. With that said, if you can fit your hand between the gap with a wrench, you can do this without removing the muffler.