|
Car won't start after intake install
Hey guys, trying to troubleshoot a starting issue.
1. Installed new Blitz intake and removed sound piping. Plugged both sound generator holes.
2. Car started and after a few seconds shut off.
3. Realized I may have not followed directions totally and the MAF was slightly off where it should have been.
4. Repositioned MAF as it should have been. Took neg battery terminal off for a while to let ECU reset.
5. Car won't turn over. Turn key, nothing.
6. Cleaned MAF with MAF cleaner
7. Put stock intake back on.
8. Car won't turn over. Turn key, nothing.
Any ideas? The starter system looks OK. Battery looks like it has lots of power. Can't find any loose connectors. I'm at a loss.
|