Quote:
Originally Posted by finch1750
It could be preload or sway end links. Easy test for the endlinks is to totally undo one and drive it and see if it still makes noise.
But yes, the allen wrench that came with it is to adjust damper stiffness. There is a small hole inside a larger hole so we are talking about 2 different allen wrenches which is confusing you.
|
It looks like me and my friend might have messed something up.. im was opened the hood and was going to adjust the stiffness and my left spring looks different from the right. Theres only 3 holes on the left for adjustment and 4 on the right. Almost like the left spring isn't in place.. and the plate at the top is blocking it.. I can literally see the ground through a little opening it has. I'm going to take it off this weekend and see if its supposed to be like that. I would think it's supposed to look the same on both sides.