Quote:
Originally Posted by Tor
Yes it's difficult because it all happens between 3 and 3.4 volts when you only have 2 point on the curve to manipulate. I could try and richen up 3.4 a notch, but I am guessing it would create another problem.
|
One of the things I did was completely change the MAF scale so that I have a lot more points in the critical region around 3V.
I don't have the numbers in front of me but my MAF scale tops out at 4.25 V since I am not boosted. I also changed the spacing of the voltage points down in the very low region where it is very linear. The end result is I have a more points to work with in the 2.5V to 3.5V region.