Quote:
Originally Posted by PandaSPUR
That part I knew, but I was thinking of the circuit as a series. Oops.
So thats not a bad idea. Although now I'm wondering how the running lights in the tail light would react... You're essentially bridging the brake and running light for one side, so that would make the running light on the one side also go on with brakes right? And if you have it hooked up so the V lights up for BOTH braking and running lights, that means brake lights will come on with running lights as well...
Or am I just getting confused here
|
This was just an idea that I had, that's why buying this harness is relatively cheap and if it doesn't work, I'll just take off the harness, and the Valenti wires are untouched.
I'm talking about the left and right Tail Lights, and not the V-bar. Basically, on the Valenti's, the light bar in the tail lights only light up when the running lights are on, so during daylight, they stay off and only the tiny brake strip turns on when you brake. The light bar looks too gorgeous to stay off during the day, so my intention is to wire it so that in the daylight, when you step on the brake, both the light bar turns on AND the brake strip turns on. Also, when the running lights are on at night, and the light bar is on, when I press brake, the brake strip would then turn on.