Quote:
Originally Posted by tato.valverde
No such thing. You apply voltage, not current. Current is then taken from the line depending on the circuit's resistance:
I=V/R
|
That part I knew, but I was thinking of the circuit as a series. Oops.
So thats not a bad idea. Although now I'm wondering how the running lights in the tail light would react... You're essentially bridging the brake and running light for one side, so that would make the running light on the one side also go on with brakes right? And if you have it hooked up so the V lights up for BOTH braking and running lights, that means brake lights will come on with running lights as well...
Or am I just getting confused here