Quote:
Originally Posted by Reamer
You need to replace the amber turn signal incandescent lights with white LED's also. Besides that it is mainly just plugging in some wires. Only tools needed is a flathead for the plastic clips, pliers to tap into the reverse light power, and 20 minutes of free time from what I gathered from the video. Haven't done it yet but I definitely will be before the catback install.
Sent from my Pixel using Tapatalk
|
I've got that from the video but it also had the stock connection/ plugged into. So my question was do you just disconnect that plug down to the stock reverse lights and are good to go?