|
My son and I installed one earlier today in about 1.5 hours on my stock '14 BRZ premium (I mostly just watched). The job was easier than expected: pop off about 6 plastic pop rivets (I bought a couple of special tools to make that easier) and two screws, remove the bumper cover, unbolt the 4 bolts and 2 nuts that hold the bumper on, hang the hitch on the two protruding studs, put the bumper back on and install with the provided bolts, torque, put the bumper cover back on. Everything fit, no drilling, bending, filing or snaking nuts through the chassis. I got mine with the removable 2" receiver and it's a beast.
-Phil
|