Quote:
Originally Posted by RiskyTrousers
Would it be difficult to install d2s 4.0s into the winjets? I can't seem to find the 3.0s anywhere. Maybe theres an adapter?
Thanks!
|
I ran into the same problem as I had decided to retro my Winjets just as TRS discontinued the Mini D2S 3.0. A few options come to mind:
1. I think I saw some NOS 3.0's in the clearance section on TRS' site over the weekend. If they are no longer there, email TRS and see if they happen to have a set laying around - That's what I did months ago and they found a set.
2. If you want to go with the 4.0's, there is a guy on one of the FB lighting groups that started making custom brackets for retrofits. If I recall correctly I saw some of his brackets going for around $75 per set. I don't remember his name, but I can look for him if you're interested.
3. Look up "nut & bolt method headlight retrofit" or a variation of it and you should find some info on mounting projectors with no direct fit.
I would definitely check with TRS first though as the 3.0's are a simple drop in (unscrew four screws holding the Winjet projector, use same four screws to secure the D2S 3.0 projector, insert bulb, wire up, re-seal and you're done.)