Quote:
Originally Posted by iLaw
I have successfully accomplished this on the BRZ. It's complicated, if you want to do it right. It took myself, electrician, 4 relays some wires and a soldering iron to do it. Will post update soon. Taking pictures of the work and will write up a full thing soon.
https://vimeo.com/173690125
https://vimeo.com/173690189
Sent from my iPhone using Tapatalk |
Did you manage to finish the write up? Looking to do this to my BRZ (single filament turn signal). I bought LEDs for side markers, but may have to revert back to filament 194s. I wonder if the following works? Basically remove the side maker ground and tap it into signal wire.
edit: nvm, i believe the above would only work with frs due to double filament signal bulbs