Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB - View Single Post

Leonardo · 11-28-2016, 06:36 PM

What size spacer is needed to fit a stock 17x7 with your BBK? I think it would be the same size spacer to make the spare fit.

Edit: Been thinking about this. Two things.

1. A 25mm or 30mm bolt on spacer should work.

2. The spare is going to be smaller diameter than your upgraded tires. Meaning if you get a flat on the rear, you should move a front wheel tire to the rear and put the spare on a front non-drive axle wheel. Different diameters are bad for the differential.

11-28-2016, 06:36 PM	#2
Leonardo Country Boy 4 Life Join Date: Jul 2012 Drives: 19' & 06' Ridgelines, 13' FR-S Location: EUGENE Posts: 5,228 Thanks: 6,719 Thanked 5,293 Times in 2,720 Posts Mentioned: 47 Post(s) Tagged: 1 Thread(s)	What size spacer is needed to fit a stock 17x7 with your BBK? I think it would be the same size spacer to make the spare fit. Edit: Been thinking about this. Two things. 1. A 25mm or 30mm bolt on spacer should work. 2. The spare is going to be smaller diameter than your upgraded tires. Meaning if you get a flat on the rear, you should move a front wheel tire to the rear and put the spare on a front non-drive axle wheel. Different diameters are bad for the differential. Last edited by Leonardo; 11-28-2016 at 07:16 PM.