Quote:
Originally Posted by markitect
I found that AMP 316836-1 040-3 receptical fits in the connector fine. So with two of those, and a AT switch assembly, you get two new buttons.
Tie Low means the switch connects to Ground not power. So whatever you want to add will have to have a power source(power plug in center consule is probably the cosesst), the fancy thing to add, then go to the wire connector to the back of the buttons, and when the button is pushed it will connect the wire to ground.
|
Could you post a link to where we could find the pins you're talking about?
And I figured that's what you meant by Tie Low, i studied electronics in another language, so it gets messy haha
Thanks for your help!