Quote:
Originally Posted by The_Understated
Now you're stretching my electrical knowledge. Quick explanation?
|
Basically, that's the pin output for the switch. I also took notes looking at a BRZ wiring diagram, and had noted pretty much the same:
1 - VSC Sport
2 - Anode (Positive end of the LED lights)
3 - Cathode (Negative end of the LED ligths)
4 - Sport (AT switch)
5 - VSC Off
6 - Snow (AT switch)
7 - non existent
8 - Ground
I checked my switch on the manual transmission, and it's missing pins 4, 6 and 7, so it's all making sense
I'm not sure what he means by tie-low (The normally ground or normally V?) but by measuring the type of output you get when you press Sport or Snow, you can easily determine if you need additional circuitry to obtain your goals.
I'll measure that in a friends AT soon =)