Toyota GR86, 86, FR-S and Subaru BRZ Forum & Owners Community - FT86CLUB - View Single Post - Rewire an AT traction button into MT? Use traction toggle as an accessory?

markitect · 11-15-2016, 01:48 PM

I looked at the electrical wiring and checked the AT switch I bought. Here is the drawing of the connector.
Name: d35.PNG
Views: 1391
Size: 1.9 KB

Pin 2 has a LED flowing to Pin 3 for lighting
Pin 8 is ground, and All buttons tie low.
Pin 6 is Snow(AT only)
Pin 5 is VSC Off
Pin 4 is Sport(AT only)
Pin 1 is VSC Sport

It looks like it is a subaru connector, I'm going to try out 040-3 recepticals in it to see if they fit in the connector. Then any Tie Low button will work.

11-15-2016, 01:48 PM	#13
markitect Senior Member Join Date: Jun 2011 Drives: Scion FRS Location: Michigan Posts: 216 Thanks: 17 Thanked 59 Times in 39 Posts Mentioned: 1 Post(s)	I looked at the electrical wiring and checked the AT switch I bought. Here is the drawing of the connector. Pin 2 has a LED flowing to Pin 3 for lighting Pin 8 is ground, and All buttons tie low. Pin 6 is Snow(AT only) Pin 5 is VSC Off Pin 4 is Sport(AT only) Pin 1 is VSC Sport It looks like it is a subaru connector, I'm going to try out 040-3 recepticals in it to see if they fit in the connector. Then any Tie Low button will work.