Quote:
Originally Posted by TylerLieberman
Very nice!
Also a fun fact- it can be done without removing the outer tie rod from the knuckle. Unthread the inner from the outer tie rod first, then remove inner tie rod from steering rack. Then transfer the boot over and install the new inner tie rod to the rack, then screw the inner tie rod into the outer rod end. Done.
That's the way I did it. Either way works though. I just didn't have a ball joint separator lol
|
I guess that works too!
I didn't have a ball joint separator either, but i had a HAMMER
Jeremy Clarkson would approve this message