[86Tony]

Originally Posted by Jeff@Racer X Fab

Here are the final pics of our catch can assembly, this has been a great project from start to finish. If you have any questions about the product please let me know.

Product overview:

The inlet and outlet use sintered stainless steel filters rated at 10 micron on the inlet and 5 micron at the outlet.





The internal baffles use a standard perforation pattern from tooling we built in house, they are designed to maximize the effect of separating oil from air during its travel from inlet to outlet.



Here is the black version of our catch can installed on the vehicle.









Dual catch can version



Here is the gray version of our catch can installed on the vehicle.









Here are the powder coated mounting bracket and stainless steel ball valve for draining the catch can.



Finally all of our pre-orders ready to ship with their temporary housings for shipping. Thank you to everyone who jumped on board during our initial orders.





The QR code on the side of our box will take you directly to our installation instructions. Instructions are also available on our website under the product listing and can be printed if you choose to do so.

will this work with JR supercharger? seems like it does.