Quote:
Originally Posted by jerbull
You need to speak with an engine builder. You need a power goal and a budget in mind beforehand. A forum isn't a great place to get engine building advice especially from start to finish. Short answer, you will not hold 20psi on a non built engine so yes you'd need a built motor.
|
you build an engine to hold HP not psi. 20 psi on a mitsu td04 is not equal to 20 psi on a precision 6262.
My personal opinion is that you can certainly build your block to reach your goals, as there are a variety of options at the moment, however, the biggest bottleneck on this platform is the transmission. most people are going thru them regularly at 400+whp.