Quote:
Originally Posted by kch
Nope. I didn't think I'd be able to overheat this setup, so I was mostly concerned with whether there was a problem with my brakes. If it's just getting too hot, that's an easy fix.
I'll probably go back to Cobalt XR2s and see if that fixes the problem.
Is it normal for it to only smear on one side like this, though?
|
Without brake ducts, and slight overheating yes. If you were massively overheating, you'd smear both sides, but you're right at the cusp where the inside is just barely over the limit of the pads, and the outside is not.