Quote:
Originally Posted by zc06_kisstherain
yes. make sure pre-load ring is snug not loose.
I slightly increased pre-load from default though.
between 2nd collar ring to bottom collar, it's 28mm on front and 35mm rear.
when i lowered mine, front gap seems little higher than rear. try 25mm or 26mm at front and should be looking similar to rear but i havent adjusted anything yet. lol
I have sti lips around and front lip still doesnt seem like very low enough to scrap anything but if i lower 0.5 inch more, i would scrap everything..haha
|
AHHH thanks for the info!