Quote:
Originally Posted by CTB727
So my CEL has been coming on and off over the past few weeks with a code P000B - cam position sensor slow response, bank 1 position B. Can someone tell me where exactly this is located?
I have searched everywhere and can't seem to pinpoint exactly where this is.
I bought a sensor from the dealer and hopefully this solves the issue. I'd imagine with the CEL being intermittent that it's a sensor issue, and not something mechanical.
|
have a look at the tsb here related to rough idle cam position and cam sensor shimming.
http://www.ft86club.com/forums/showthread.php?t=21868
Unfortunatly it might not be as easy as the sensor
it could be the cam sprocket/actuator or the cam oil control valve that causing the slow response to ecu commands. ie the sensor is ok
or a problem with the ecu itself