|
From what I've found online the light you have is a 2 wire, one ground, one power. This only gives on/off. You will need a three wire (two separate power leads) and dual mode bulb for this. You can change to marker only by moving the red to tap the marker light. I installed a kit from iJDMToy (SKU: 75-224) that had the dim/bright mode. You just tap dim to the marker and bright to the brake in the taillight. (full disclosure: not affiliated with any MFG. Just did some taillight mods)
__________________
Mostly stock on Prius tires! 
Last edited by bstyle75; 10-01-2016 at 12:23 AM.
|