Quote:
Originally Posted by LucidMomentum
Yeah same here. In theory it's fine because the Procede is now handling the boost control portion of the controller, via the ECU readings and all that. So the phantom controller box is mostly for sending power to the motor and keeping the batteries topped up, which it's still doing.
|
Sounds like you might be getting a bad signal from the procede....easy way to check is to just disconnect the procede control and connect up your throttle switch for a quick test with the car ON but not running.
Make sure to ground the throttle switch to the chassis when activating or it might not work. Simply pressing it against the frame while clicking the switch should be enough.