The Gurus at Hydra EMS sniffing CAN data for Hydra EMS implementation. The CAN system is very extensive on the FRS/BRZ but they've cracked everything they need for the CAN integration into the Hydra EMS
Let the wiring begin! Stand-alone EMS integration these days if very involved for plug and play systems. Full CAN integration is the only way to go. We've already found mistakes in a few of the wiring schematics (not uncommon in the early stages).
And you thought your stereo wiring was tough.
Luckily Hydra EMS is plug and play.
Here is a baseline dyno (OEM ECU) we did while dumping CAN data. This was done with 18x9.5 wheels. Dyno operator at ISP mentioned his dyno reads low. Not concerned at the point as I will most likely be doing my work on a Mustang dyno and will baseline again.
The Element Hydra EMS is in our FRS so stay tuned!