Quote:
Originally Posted by weederr33
Meh, I know. But I figured it was the right decision.
|
Ya ......I most likely would have done the same thing.
Yep, clutch disk, pressure plate, throw out bearing should come as a "set" ....
The flywheel is usually OK, unless one has "blown up" the clutch ..... however, these days, not many of these spindle engines have enough torque to "blow up" a clutch. Not like in the old days ....... where the pieces would blow out of the bellhousing and up through the floorboard ......
......and the drag strips were uphill .....in both directions ......
humfrz