Quote:
Originally Posted by ARTBRZ
The metal piece is glued to the bottom of the damaged clip. The clip will have a rough surface and a smooth surface. Put the glue on the rough surface, wait two min and apply on the clean area (broken clip). After that clamped it down with a binder clip for 15 min to let the glue harden and your good to go.
You can't really tell from this pic but the hole on the metal part will be thinner than the bumper clip but it will still fits.
I installed it on the 3rd of this month and I washed it 3 times with a pressure washer since install and its holding up.
|
If we look at the instructions included with the package you have to glue the metal piece to the bumper, not the clip , but if that worked for you then good for you
Sent from my MotoG3 using Tapatalk