Quote:
Originally Posted by Johnny.
I had to cut off like the lip of that area to stop rubbing. All the local RBs also cut this area to stop rubbing.
I'm also running a really low offset so you probably won't have to cut as much as I did.
 |
np, but if you look at the picture you posted. the face of the wheel is sticking out of fender? offset basically determine how much that sticks out or goes into fender. when you turn the wheel base on the offset you have now, your tire will rub against fender. it's kind of late now since you already purchase rims unless you can trade back for am offset that fits your fender, than you won't have to cut anything
good luck let's hope it's not to costly